[Live-devel] reading on stdin

moses pawar mpawar at usc.edu
Tue Apr 6 14:30:31 PDT 2004


Hi everyone,
My camera outputs MPEG2 data on stdout.....so in testOndemandRTSPserver I tried 
to read from stdin ( i specify stdin instead of filename test.mpg) using 
options MPEG1or2eESVideoTest and MPEG1or2AudioVideoTest
but I get frame size too large error.
What may be the cause?
Thank you very much.
Moses.



www.mosespawar.com

----- Original Message -----
From: live-devel-request at ns.live.com
Date: Thursday, April 1, 2004 12:00 pm
Subject: live-devel Digest, Vol 6, Issue 1

> Send live-devel mailing list submissions to
> 	live-devel at lists.live.com
> 
> To subscribe or unsubscribe via the World Wide Web, visit
> 	http://lists.live.com/mailman/listinfo/live-devel
> or, via email, send a message with subject or body 'help' to
> 	live-devel-request at lists.live.com
> 
> You can reach the person managing the list at
> 	live-devel-owner at lists.live.com
> 
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of live-devel digest..."
> 
> 
> Today's Topics:
> 
>   1. Re: Re: One (maybe two) little bug in Makefile.tail
>      (Matteo Nastasi)
>   2. Re: RTP stream test (Simon Schampijer)
>   3. Re: RTP stream test (Ross Finlayson)
>   4. About FramedSource (Achraf GAZDAR)
>   5. Re: About FramedSource (Ross Finlayson)
> 
> 
> ----------------------------------------------------------------------
> 
> Message: 1
> Date: Thu, 1 Apr 2004 10:10:57 +0200
> From: Matteo Nastasi <matteo.nastasi at tvblob.com>
> Subject: Re: [Live-devel] Re: One (maybe two) little bug in
> 	Makefile.tail
> To: "LIVE.COM Streaming Media - development & use"
> 	<live-devel at ns.live.com>
> Message-ID: <20040401081057.GA28818 at blob6>
> Content-Type: text/plain; charset=us-ascii
> 
> On Wed, Mar 31, 2004 at 09:19:54AM -0800, Ross Finlayson wrote:
> > Matteo,
> > 
> > Thanks for noting the Makefile problem; it has been fixed in the most 
> > recent release (2004.03.27).
> ;)
> 
> ---- 8< ---- 8< ---- 8< ---- 8< ---- 8< ---- 8< ---- 8< ---- 8< 
> > 
> > >with this trick the select() return and the check of watchVariable shutdown
> > >without delay the thread-live.
> > 
> > But if you *don't* call "write(wr_fd,"w",1);", exactly the same thing 
> will 
> > happen: When you return to the event loop (see 
> > "BasicTaskScheduler0::doEventLoop()"), the watch variable will be non-
> zero, 
> > and you'll return from the event loop.  Creating the 'fd's, and calling 
> > "turOnBackgroundReadHandling()" adds nothing.
> 
> In some cases [when my prog is waiting data from the net (and the network
> data streaming is interrupted)] it skip the wait of select timeout,
> and make fast the shutdown of the component.
> 
> Best regards, Matteo.
> 
> 
> > 
> > 
> > 	Ross Finlayson
> > 	LIVE.COM
> > 	<http://www.live.com/>
> > 
> > _______________________________________________
> > live-devel mailing list
> > live-devel at lists.live.com
> > http://lists.live.com/mailman/listinfo/live-devel
> > 
> 
> 
> ------------------------------
> 
> Message: 2
> Date: 01 Apr 2004 10:57:59 +0200
> From: Simon Schampijer <Simon.Schampijer at ircam.fr>
> Subject: Re: [Live-devel] RTP stream test
> To: "LIVE.COM Streaming  " Media - development & use
> 	<live-devel at ns.live.com>
> Message-ID: <1080809879.23305.4.camel at licorne.ircam.fr>
> Content-Type: text/plain; charset=UTF-8
> 
> Le mer 31/03/2004 à 19:13, Ross Finlayson a écrit :
> 
> > By the way, I now recommend using "VLC" <http://www.videolan.org/vlc/> 
> > instead of MPlayer to receive/play RTP streams.
> > 
> > 
> > 	Ross Finlayson
> > 	LIVE.COM
> > 	<http://www.live.com/>
> 
> 
> Where do I find the RTSP/RTP client support in the videolan project.
> 
> like in the mplayer project--->"demux_rtp*" in the "libmpdemux"
> directory.
> 
> Thanks in regards
> Simon
> 
> > _______________________________________________
> > live-devel mailing list
> > live-devel at lists.live.com
> > http://lists.live.com/mailman/listinfo/live-devel
> > 
> 
> 
> ------------------------------
> 
> Message: 3
> Date: Thu, 01 Apr 2004 02:40:56 -0800
> From: Ross Finlayson <finlayson at live.com>
> Subject: Re: [Live-devel] RTP stream test
> To: "LIVE.COM Streaming Media - development & use"
> 	<live-devel at ns.live.com>
> Message-ID: <6.0.1.1.1.20040401024036.02cebb00 at localhost>
> Content-Type: text/plain; charset="us-ascii"; format=flowed
> 
> 
> >Where do I find the RTSP/RTP client support in the videolan project.
> 
> This code is in the file "
> 
> 
> vlc/modules/demux/livedotcom.cpp" (in the VLC source code).
> 
> 
> 	Ross Finlayson
> 	LIVE.COM
> 	<http://www.live.com/>
> 
> 
> ------------------------------
> 
> Message: 4
> Date: Thu, 1 Apr 2004 17:46:11 +0200 (CEST)
> From: Achraf GAZDAR <achraf_g at yahoo.fr>
> Subject: [Live-devel] About FramedSource
> To: live-devel at ns.live.com
> Message-ID: <20040401154611.51433.qmail at web25108.mail.ukl.yahoo.com>
> Content-Type: text/plain; charset="iso-8859-1"
> 
> Hi all,
> I want to know where to get the movie duration through live.com. I have 
> seen the member variable "DurationInMillisecond" in FramedSource.h and i'm 
> confused if this is the movie or the frame duration (presentation duration).
> second, is this (0 <= presentationtime <= movieduration) right?
> Thanks in advance,
> 
> 
>        	
> ---------------------------------
> Yahoo! Mail : votre e-mail personnel et gratuit qui vous suit partout !
> Créez votre Yahoo! Mail
> 
> Dialoguez en direct avec vos amis grâce à Yahoo! Messenger !
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: http://lists.live.com/pipermail/live-
> devel/attachments/20040401/449784e3/attachment-0001.html
> 
> ------------------------------
> 
> Message: 5
> Date: Thu, 01 Apr 2004 07:54:51 -0800
> From: Ross Finlayson <finlayson at live.com>
> Subject: Re: [Live-devel] About FramedSource
> To: "LIVE.COM Streaming Media - development & use"
> 	<live-devel at ns.live.com>
> Message-ID: <6.0.1.1.1.20040401075149.02d06260 at localhost>
> Content-Type: text/plain; charset="us-ascii"; format=flowed
> 
> 
> >  I have seen the member variable "DurationInMillisecond" in 
> > FramedSource.h and i'm confused if this is the movie or the frame 
> > duration (presentation duration).
> 
> The "durationInMicroseconds" (note: *not* milliseconds) parameter is the 
> duration of the *frame* of data returned in the 'after function' passed to 
> "getNextFrame()".
> 
> 
> 	Ross Finlayson
> 	LIVE.COM
> 	<http://www.live.com/>
> 
> 
> ------------------------------
> 
> _______________________________________________
> live-devel mailing list
> live-devel at lists.live.com
> http://lists.live.com/mailman/listinfo/live-devel
> 
> 
> End of live-devel Digest, Vol 6, Issue 1
> ****************************************
> 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: mpawar.vcf
Type: text/x-vcard
Size: 291 bytes
Desc: Card for moses pawar <mpawar at usc.edu>
Url : http://lists.live.com/pipermail/live-devel/attachments/20040406/29ef3b61/mpawar.vcf


More information about the live-devel mailing list