[Live-devel] GroupsockHelper.cpp ReceivingInterfaceAddr

[钟贵平]

Hi Arnold,
     I see.Thanks for your help :-)

Zhonggp
    
----- Original Message ----- 
From: "Arnold Liu" <asliu23 at yahoo.com>
To: "LIVE.COM Streaming Media - development & use" <live-devel at ns.live.com>
Sent: Tuesday, November 02, 2004 4:35 PM
Subject: Re: [Live-devel] GroupsockHelper.cpp ReceivingInterfaceAddr


> Hi Zhonggp,
> 
> You're right - When I change the default route on my
> system, normal traffic is interrupted.  This is fine
> for me, and I don't know how to set up the application
> to stream to an interface which isn't the default one.
> 
> Arnold
> 
> --- é'Y贵平 <zhonggp at chinabizone.com> wrote:
> 
> > Hi Arnold,
> >      I don't understand your way much. I wonder how
> > you changed the default route just to the interface
> > your wanted to use. How did you get that? I mean,
> > the default route is always fixed , say , in my case
> > :
> >                     Destination     Gateway        
> > Genmask         Flags Metric Ref    Use Iface
> >                     192.168.10.0    *              
> > 255.255.255.0   U     0      0        0 eth1
> >                     211.100.12.0    *              
> > 255.255.255.0   U     0      0        0 eth0
> >                     default         211.100.12.9   
> > 0.0.0.0         UG    0      0        0 eth0
> >     
> >     If I change the default route  , then I'll get
> > disconnected from internet. So ,may you give me some
> > more details ?
> > 
> > 
> > 
> >    Best regards.
> >  Zhonggp.
> > 
> > 
> 
> _______________________________________________
> live-devel mailing list
> live-devel at lists.live.com
> http://lists.live.com/mailman/listinfo/live-devel