[Live-devel] RTSP server/client application

[Vankrunkelsven, Tony (NSN - BE/Herentals)]

Hi All,
 
Is it possible to use the LIVE555 Streaming Media
<http://www.live555.com/liveMedia/>  libraries for the following two
applications:
1) Software RTSP server / Hardware RTP streamer:
There is a host handling all RTSP/RTCP related issues like connection
setup, session control, RTP streaming control of dedicated hardware,
.... The hardware can generate multiple streams at high bitrates and can
be controlled by the host with a dedicated interface. So the RTP stream
is directly send by the hardware. The data doesn't pass at all through
the host. Basically the host is the RTSP server and the RTP server is
done in hardware. Can only the RTSP server part of the library be used
without having the real stream available at the host? And can a
dedicated interface to the hardware be added for setting parameters like
(RTP payload type, port number, IP number, ....)? 
 
2) Software RTSP client / Hardware RTP receiver: 
Similar as the server but then the host runs only a RTSP client and the
hardware can receive multiple streams at high bitrates.
 
 
Regards,
Tony Vankrunkelsven 
Design Engineer
* +32 14 25 27 44
Fax +32 14 25 25 70
* tony.vankrunkelsven at nsn.com

Nokia Siemens Networks n.v.
Atealaan 34 
B-2200 Herentals 
Belgium 
www.nokiasiemensnetworks.com <http://www.nokiasiemensnetworks.com/> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.live555.com/pipermail/live-devel/attachments/20080417/24f805be/attachment.html