[Live-devel] Problems with streaming live h264 video on TI da Vinci platform.

[Amit Lobo]

Hi ishawar,
It is the dvsdk demo software got with Evaluation board.
Thanks & Regards

Amit



2008/6/13 <Ishwar.Jasuja at jci.com>:

>
> Amit,
>
> What is TI demo? Is it a TI eval board?
>
> I am running this software on our video card that uses DM642 TI processor
> and has TI BIOS (operating system) on it.
> For networking stack, we are using TI NDK.
>
> I am using code composer(CCStudio) v3.3 for development environment.
>
> Ishwar
>
>
>
>   *"Amit Lobo" <amit.lobo at gmail.com>*
> Sent by: live-devel-bounces at ns.live555.com
>
> 06/10/2008 05:45 PM
>    Please respond to
> LIVE555 Streaming Media - development & use        <
> live-devel at ns.live555.com>
>
>    To
> "LIVE555 Streaming Media - development & use" <live-devel at ns.live555.com>
> cc
>   Subject
> Re: [Live-devel] Problems with streaming live h264 video on TI da
>  Vinci platform.
>
>
>
>
> Hi Ishwar,
> Thanks for you help.
> Are you using TI demo and live555 together?
> Because my problem lies in the integration side.
>
> About timer I dont think I am facing similar problem that you have
> mentioned,because I have done test with reading video from the file.
>
> Thanks & Regards
>
> Amit
>
>
>
> 2008/6/11 <*Ishwar.Jasuja at jci.com* <Ishwar.Jasuja at jci.com>>:
>
> I ran into some strange timer manipulation problem while doing porting for
> TI NDK and had to make following change.
>
> #ifdef TIME_BASE
> typedef TIME_BASE time_base_seconds;
> #else *
> typedef int time_base_seconds;*
> #endif
>
> With the original code ( *typedef long time_base_seconds;), *it would do 8
> bytes subtraction(treating *tv_usec* as unsigned long long) while
> executing the second line (highlighted code in following piece of code)
> below. And that would screw up the value of the* tv_sec*  field which
> is right before tv_usec field in the structure.
>
>
>
> DelayInterval operator-(const Timeval& arg1, const Timeval& arg2) {
>  time_base_seconds secs = arg1.seconds() - arg2.seconds(); *
>  time_base_seconds usecs = arg1.useconds() - arg2.useconds();*
>
>  if (usecs < 0) {
>    usecs += MILLION;
>    --secs;
>  }
>  if (secs < 0)
>    return DELAY_ZERO;
>  else
>    return DelayInterval(secs, usecs);
> }
>
>
> I hope this helps.
>
> Thanks
> Ishwar
>
>
>   *Mike Gilorma <**mike.gilorma at apogeelabs.com*<mike.gilorma at apogeelabs.com>
> *>*
> Sent by: *live-devel-bounces at ns.live555.com*<live-devel-bounces at ns.live555.com>
>
> 06/10/2008 05:15 AM
>   Please respond to
> LIVE555 Streaming Media - development & use        <*
> live-devel at ns.live555.com* <live-devel at ns.live555.com>>
>
>
>   To
> LIVE555 Streaming Media - development & use <*live-devel at ns.live555.com*<live-devel at ns.live555.com>
> >  cc
>   Subject
> Re: [Live-devel] Problems with streaming live h264 video on TI        da
>      Vinci platform.
>
>
>
>
>
> I have one of those board here and was thinking about trying to port
> live555 over to it.  Are you running Virtual Logix Linux or did you
> actually port it over to the DSP?  If you can send me your test code or
> project I can help debug.
>
> On Tue, 2008-06-10 at 17:46 +0800, Amit Lobo wrote:
> > Hi All,
> >
> > I am able to port and run Live555 on DSP/BIOS of EVM6437.The test I
> > did is reading stored h264 video from a file.
> >
> > Now when I try to use live frames from the encoder I face problem
> > after 1 sec of video play.I can see the first 1 sec video properly,but
> > later after 1 sec it looks like something goes wrong with the RTP.The
> > client I am using is VLC media player.
> > Want to know if anybody has face similar problem.
> >
> > Thanks in advance
> >
> > Amit
> > _______________________________________________
> > live-devel mailing list
> > *live-devel at lists.live555.com* <live-devel at lists.live555.com>
> > *http://lists.live555.com/mailman/listinfo/live-devel*<http://lists.live555.com/mailman/listinfo/live-devel>
>
>
> _______________________________________________
> live-devel mailing list*
> **live-devel at lists.live555.com* <live-devel at lists.live555.com>*
> **http://lists.live555.com/mailman/listinfo/live-devel*<http://lists.live555.com/mailman/listinfo/live-devel>
>
>
> _______________________________________________
> live-devel mailing list*
> **live-devel at lists.live555.com* <live-devel at lists.live555.com>*
> **http://lists.live555.com/mailman/listinfo/live-devel*<http://lists.live555.com/mailman/listinfo/live-devel>
>
> _______________________________________________
> live-devel mailing list
> live-devel at lists.live555.com
> http://lists.live555.com/mailman/listinfo/live-devel
>
>
> _______________________________________________
> live-devel mailing list
> live-devel at lists.live555.com
> http://lists.live555.com/mailman/listinfo/live-devel
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.live555.com/pipermail/live-devel/attachments/20080613/a277b396/attachment-0001.html>