[Live-devel] Proxy Server rtsperver timeout with 400 error

[Bob Bischan]

Be sure to read changelog.txt for recent updates/changes to ProxyServer
implementation. I have been testing ProxyServer with numerous streams /
client connections with success.

Bob

On Sun, Nov 3, 2013 at 2:10 AM, Craig Matsuura <cmatsuura at vivint.com> wrote:

> I have a question in regards to the live555proxyServer.  I have been
> playing with the server and have implemented one for our use for our
> project.  It works great when connecting to all proxied rtsp streams,
> however if I wait about 10-15 seconds and than connect a client I always
> get a 400 Bad Request error returned to the server on a SETUP.
>
> It seems to be specific to the rtspserver I proxy.  I have two sets of
> cameras I'm proxing, one set does not exhibit the problem where as the
> other does.  I have played with changing the liveness value from the
> default of 60 secs to around 14 secs.  But it really seems as if it does
> not matter if I lower the value.  I'm guessing the server is not
> honoring the the fact the liveness is sending an OPTION to command to
> keep it alive.
>
> So in the case of getting an 400 error, what can one do to get the proxy
> server to reconnect to the server that is failing.  I know that the
> camera rtsp server I'm proxing works every time from a client if I
> directly goto the rtsp://address of the camera, however via the proxy
> server it will fail if I wait too long.
>
> Thanks,
> Craig
> _______________________________________________
> live-devel mailing list
> live-devel at lists.live555.com
> http://lists.live555.com/mailman/listinfo/live-devel
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.live555.com/pipermail/live-devel/attachments/20131103/66e2f511/attachment.html>