[Live-devel] RTSP URL format for a Swann 806 network camera

[Marcin]

Hi Ross,
I have a lot of fun in reverse engineer IPCams - i have telnet access 
passwords to many of them. If you need some - just ask.
Marcin

W dniu 2014-10-31 16:21, Ross Finlayson pisze:
>> # ifconfig
>> eth0      Link encap:Ethernet  HWaddr EC:71:DB:2F:23:E6
>>           inet addr:50.0.150.53  Bcast:50.0.150.255 Mask:255.255.255.0
>>           inet6 addr: 2001:470:82e9:1:ee71:dbff:fe2f:23e6/64 Scope:Global
>>           inet6 addr: 2001:470:82e9:0:ee71:dbff:fe2f:23e6/64 Scope:Global
>>           inet6 addr: fe80::200:23ff:fe34:4566/64 Scope:Link
>>           UP BROADCAST RUNNING MULTICAST  MTU:1500 Metric:1
>>           RX packets:80844 errors:0 dropped:0 overruns:0 frame:0
>>           TX packets:96361 errors:0 dropped:0 overruns:0 carrier:0
>>           collisions:0 txqueuelen:1000
>>           RX bytes:5525623 (5.2 MiB)  TX bytes:7345725 (7.0 MiB)
>>           Interrupt:12
>
> Nice.  How were you able to get shell access?
>
> In any case (as I noted in my last email), I was able to find a 
> working URL:
> rtsp://<ip-address>/h264Preview_01_main
>
>
> Ross Finlayson
> Live Networks, Inc.
> http://www.live555.com/
>
>
>
> _______________________________________________
> live-devel mailing list
> live-devel at lists.live555.com
> http://lists.live555.com/mailman/listinfo/live-devel

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.live555.com/pipermail/live-devel/attachments/20141031/86c23ac3/attachment-0001.html>