[Live-devel] It works!!!But multicasting performance not good.

[Mike Yan]

Ross, you are right. I tested the multicast without our router. It works
great. Now we know our router does not support multicast well.
Thank you for your help!


>Thank for your help. I am finally able to multicast and unicast the *.mpg
>files (mpeg 1 format) by using testMPEG1or2VideoStreamer and
>testMPEG1or2AudioVideoStreamer programs.
>Here is something I found. When I do the unicasting, the video running
>smoothly, but if I do the multicasting, the video is not smooth, kind of
>jerking a lot. I am wondering whether it's my problem for missing some
>settings. And how to make the streaming smooth when doing multicast.

What kind of network are you using?  For some networks - most notable 
802.11 wireless LANs - multicast traffic can end up getting less bandwidth 
than unicast (because, in 802.11, multicast traffic gets sent at the lowest 
supported bitrate, unless the nodes are configured to do otherwise).  Or, 
if you're using a wired LAN, then perhaps your router(s) aren't handling 
multicast properly.

Apart from this, I don't know what to suggest.  Because as far as the 
sender and receiver applications are concerned, RTP packets behave the same 
way regardless of whether they're unicast or multicast.



	Ross Finlayson
	LIVE.COM
	<http://www.live.com/>

_______________________________________________
live-devel mailing list
live-devel at lists.live.com
http://lists.live.com/mailman/listinfo/live-devel