[Live-devel] RTP sink to serial

[Yedidia Amit]

But I am limited to 1006 bytes datagram which increase the UDP/RTP
header overhead.

Regards,


Amit Yedidia
Elbit System Ltd.

Email: amit.yedidia at elbitsystems.com
Tel: 972-4-8318905
----------------------------------------------------------

 

> -----Original Message-----
> From: live-devel-bounces at ns.live555.com 
> [mailto:live-devel-bounces at ns.live555.com] On Behalf Of Ross Finlayson
> Sent: Thursday, November 20, 2008 1:23 PM
> To: LIVE555 Streaming Media - development & use
> Subject: Re: [Live-devel] RTP sink to serial
> 
> >Just a random thought, which might save you having to have this 
> >IP-to-serial conversion process...  I don't know whether you've got 
> >control of the other end of the serial line, but could you not just 
> >set up a SLIP interface and send the RTP over that?   The Live555 
> >code would just see it as a normal IP interface.  You'd need to do 
> >this at both ends, but you could then have a standard UDP socket 
> >listener at the receiver end to receive the RTP packets.
> 
> Yes - great idea.  I definitely recommend this.  That way, you don't 
> have to write any UDP/IP parsing code at the receiving end.
> -- 
> 
> Ross Finlayson
> Live Networks, Inc.
> http://www.live555.com/
> _______________________________________________
> live-devel mailing list
> live-devel at lists.live555.com
> http://lists.live555.com/mailman/listinfo/live-devel
> 

The information in this e-mail transmission contains proprietary and business 
sensitive information.  Unauthorized interception of this e-mail may constitute 
a violation of law. If you are not the intended recipient, you are hereby 
notified that any review, dissemination, distribution or duplication of this 
communication is strictly prohibited. You are also asked to contact the sender 
by reply email and immediately destroy all copies of the original message.