[Live-devel] openRTSP TS receive as an another program input

[Mr. Teddy]

            And when I receiving a TS with -v option, this will put to stdout only the video? Because I need the video and audio with TS container to feed my applicaton, so I need the untouchet TS data.
 
How can I use the -v option, because I've tried to start openRTSP with this command:
"openRTSP "rtsp://<ip>:<port>/testtransportstream" -v"
But I get error.When I run like this:
"openRTSP "rtsp://<ip>:<port>/testtransportstream""
It receive the ts fine, so I don't know where must be put the addictional command line options.
-- Eredeti üzenet --
Feladó: Ross Finlayson <finlayson at live555.com>
Címzett: LIVE555 Streaming Media - development & use <live-devel at ns.live555.com>
Másolat: 
Elküldve: 04:53
Téma: Re: [Live-devel] openRTSP TS receive as an another program input>But in the website of openRTSP, there are the following:>>-v play only the video stream.>>Not the "-r" option cause to write to stdout?"-v" means: Play (and receive) only the video stream, outputting the received data to 'stdout'."-r" means: Play the entire stream (i.e., video and audio, if present), but don't actually receive the data ourself. (The data will still arrive, but we don't actually receive it ourself.)-- Ross FinlaysonLive Networks, Inc.http://www.live555.com/_______________________________________________live-devel mailing listlive-devel at lists.live555.comhttp://lists .live555.com/mailman/listinfo/live-devel


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.live555.com/pipermail/live-devel/attachments/20090424/8fc61b25/attachment.html>