[Live-devel] openRTSP 2x

[Jens Binder]

Hello,

Most probably your SPS and PPS-Headers are in the SDP-Information of 
your RTSP-DESCRIBE-Response. Look RFC 3984 in section 8.2. for more 
information.

Normally both Header are Base64-encryptet in the "sprop-parameter-sets".

jens.

Němec Alexandr schrieb:
> Dear all,
> I have two questions regarding openRTSP.
> 1. I have a H264 camera with built-in RTSP server (an IP camera) and I am using openRTSP to receive the video stream. It works nice, I can receive frames of type IDR slices and other coded slices. However, a standard H264 also contains a SPS (sequence parameter set) NAL unit followed by a PPS (picture parameter set) NAL unit followed by the first IDR frame. The IP camera manufacturer confirmed that they include the SPS+PPS "header bytes" before the very first IDR frame and also before some later IDR frames at regular intervals. As I receive clean frames from live555 library without SPS+PPS I ust want to ask, if there is the possibility to somehow get these bytes, because I want to save them before the start of the stream. I tested the incoming frames and the first byte tells me, that the frames are clean IDR slices and other coded slices (NAL unit types 5 and 1). The SPS and PPS "header bytes" are missing.
> 2. Is there a way to set a custom timeout value for the RTSP client that the client would use for each command like PLAY, TEARDOWN or OPTIONS? I would like to be able to change the timeout and to force the RTSP client to complete a method master when the RTSP server is unavailable. I searched the code and found some timeout parameters, but I am not sure that I am doing the right thing.
> Thanks very much in advance
> Alex
> 
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> live-devel mailing list
> live-devel at lists.live555.com
> http://lists.live555.com/mailman/listinfo/live-devel