[Live-devel] Live555 RTSP Client and Panasonic BL-C210 IP camera

[Renato MAURO (Libero)]

Hi Sambhav.


    I had the same problem with some Samsung devices, since the server on 
some camera and DVR don't handle RTCP messages; instead Samsung decided to 
manage liveness with GetParameter RTSP command.
    Anyway Samsung states clearly this (non standard) behaviour in 
developer's manual.


Hope this helps,

    Renato

----- Original Message ----- 
From: "Kumar Sambhav" <sambhav at saranyu.in>
To: "LIVE555 Streaming Media - development & use" 
<live-devel at ns.live555.com>
Sent: Monday, March 19, 2012 8:39 PM
Subject: [Live-devel] Live555 RTSP Client and Panasonic BL-C210 IP camera


> Hi,
>
> I am using openRTSP client to receive RTSP streams from Panasonic BL-C210 
> IP camera. After  ~65seconds openRTSP stops receiving data.
> Any known issues in live555 RTSP client accessing panasonic cameras ?
>
> Server stops sending data, if it does not receive RTCP packets with the 
> timeout period. Is this correct ?
>
> I captured data using wireshark and saw that RTCP packets are  sent and 
> received by both server and client.  (as no ICMP packets were seen)
>
>
> Regards,
> Sambhav
>
>
> _______________________________________________
> live-devel mailing list
> live-devel at lists.live555.com
> http://lists.live555.com/mailman/listinfo/live-devel
>