[Live-devel] Live555 RTSP Client and Panasonic BL-C210 IP camera

[Kumar Sambhav]

Hi Renato,

Thanks for sharing the information.
Panasonic manuals does not mention any such thing.  Will check with their support. 

Regards,
Sambhav

On Mar 20, 2012, at 4:58 PM, Renato MAURO (Libero) wrote:

> Hi Sambhav.
> 
> 
>   I had the same problem with some Samsung devices, since the server on some camera and DVR don't handle RTCP messages; instead Samsung decided to manage liveness with GetParameter RTSP command.
>   Anyway Samsung states clearly this (non standard) behaviour in developer's manual.
> 
> 
> Hope this helps,
> 
>   Renato
> 
> ----- Original Message ----- From: "Kumar Sambhav" <sambhav at saranyu.in>
> To: "LIVE555 Streaming Media - development & use" <live-devel at ns.live555.com>
> Sent: Monday, March 19, 2012 8:39 PM
> Subject: [Live-devel] Live555 RTSP Client and Panasonic BL-C210 IP camera
> 
> 
>> Hi,
>> 
>> I am using openRTSP client to receive RTSP streams from Panasonic BL-C210 IP camera. After  ~65seconds openRTSP stops receiving data.
>> Any known issues in live555 RTSP client accessing panasonic cameras ?
>> 
>> Server stops sending data, if it does not receive RTCP packets with the timeout period. Is this correct ?
>> 
>> I captured data using wireshark and saw that RTCP packets are  sent and received by both server and client.  (as no ICMP packets were seen)
>> 
>> 
>> Regards,
>> Sambhav
>> 
>> 
>> _______________________________________________
>> live-devel mailing list
>> live-devel at lists.live555.com
>> http://lists.live555.com/mailman/listinfo/live-devel
> 
> 
> _______________________________________________
> live-devel mailing list
> live-devel at lists.live555.com
> http://lists.live555.com/mailman/listinfo/live-devel