[Live-devel] whether can proxyServer support multi ethernet occasion

[Yang Sheng]

OK, and I have read the code related to proxyServer and made some 
changes with the file groupsock/GroupsocksHelper.cpp. Now the stream 
data is stuck after PLAY command send. I wonder can I directly modify 
the code to forward data stream obtained from eth0 to eth1 in the 
application layer ?

On 2024/8/26 21:10, Ross Finlayson wrote:
> As an application running above the kernel, the “LIVE555 Proxy Server” (like all LIVE555 applications) doesn’t know or care what network interfaces your computer has.  All it knows about are IP addresses.  So, as long as your kernel has a route to each of your IP subnets (in your case: 192.168.1.xx and 10.20.38.xx), then the “LIVE555 Proxy Server” should be able to reach ‘back-end’ RTSP servers on each of these networks.
>
> You can test this by running “openRTSP” (our command-line RTSP client; see http://live555.com/openRTSP/ ) on this computer, to check whether you can reach each ‘back-end’ RTSP server.
>
>
> Ross Finlayson
> Live Networks, Inc.
> http://www.live555.com/
>
>
> _______________________________________________
> live-devel mailing list
> live-devel at lists.live555.com
> http://lists.live555.com/mailman/listinfo/live-devel