[Live-devel] Axis camera

[Cha Gascon]

My situation is similar with this one.

Using Axis 214 network camera and openRTSP as client. Used -t option for
rtsp over tcp.

I can connect and play the stream but after a while, it will stop streaming.
When it actually stops is random, sometimes a few frames, sometimes after
getting a lot of frames.

Streamed using mplayer (with -rtsp-stream-over-tcp option), and it seems to
be playing fine.

Any ideas?


2008/2/21 Ferruccio Fiorucci <ferruccio.fiorucci at gmail.com>:

> Hi,
>
> I think I'm using a different version of openRTSP( the last version I
> found in the server ), and I can't use the -e option, it's not foreseen.
>
> Anyway I found a solution using the -t opion ( i.e. using the RTP over TCP
> ).
>
> With this option i can save a mpeg4 file, but at this moment I have a
> strange problem with this feature:
>
> when I try to save the file coming from the camera, the openRTSP program
> sometimes creates a good file, sometimes creates an useless bad file very
> small. The problem is that I don't know why this problem happens, it seems
> random…….
>
>
>
> Do you have any idea to solve this problem?
>
>
>
> Thanks
>
>
> Best Regards
>
> 2008/2/20 Sigismondo Boschi <s.boschi at totalwire.it>:
>
> > Ferruccio Fiorucci wrote:
> > > Hello,
> > >
> > > I'm trying to use the openrtsp program in order to connect to an Axis
> > > camera ( axis 207 ) unsuccesful!!!
> > > All seems to go well, I sand to camera all the right commands (
> > > DESCRIBE, PLAY, and so on..) but when i can see in the shell
> > "Receiving
> > > streamed data", I cant save the data in a file.
> > > The program creates the file, but it's empty ( its dimension is 30
> > Byte ).
> > > The parameters I use are:
> > >
> > > openRTSP -d 10 -S 54 -n -F prova rtsp://192.168.3.140/mpeg4/media.amp
> > >
> > Hi,
> > I can do it successfully, with an Axis camera. However I have slightly
> > different options (maybe older/newer version... openRTSP.exe -e 10 -F
> > test rtsp://192.168.0.42/mpeg4/media.amp ). Be careful with firewalls (I
> > mean Windows or Linux ones), because the client is working as an UDP
> > server. Try with the "-t" option - it lets the RTP communication take
> > place over the estabilished TCP connection.
> >
> > Ciao,
> >    Sigismondo
> >
> > --
> > ------------------------------------------------------------------
> > Sigismondo Boschi, PhD                     TotalWire S.r.l.
> > s.boschi at totalwire.it                      http://www.totalwire.it
> > cell: +39 346 7911896                      tel:  +39 051 302696
> >
> > _______________________________________________
> > live-devel mailing list
> > live-devel at lists.live555.com
> > http://lists.live555.com/mailman/listinfo/live-devel
> >
> >
>
> _______________________________________________
> live-devel mailing list
> live-devel at lists.live555.com
> http://lists.live555.com/mailman/listinfo/live-devel
>
>


-- 
Marie Charisse L. Gascon
http://www.chasys.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.live555.com/pipermail/live-devel/attachments/20080331/27413b34/attachment.html