[Live-devel] RTP sink to serial

[Ross Finlayson]

>1. Does the SLIP needs full duplex channel (I need data transfer only in
>one direction)

Yes, you need a full duplex channel, for RTCP "Receiver Report" 
packets coming back from the receiver.  You would also need a 
full-duplex channel if you want RTP-over-TCP (see below).

>2. If I want to add some error detection and error resilience bits,
>outside the Live555 (the live will receive/send normal IP packets
>from/toward the SLIP), is there clean way to implement it?

No, not really.  But do you really expect much data loss over your 
SLIP channel?  If so, you could do RTP-over-TCP.
-- 

Ross Finlayson
Live Networks, Inc.
http://www.live555.com/