[Live-devel] testProgs tested ?

[Glen Gray]

Looking back through the archives I see this was an issue for someone  
back in 2005. I've added the suggested multicastSendOnly() call to the  
outbound groupsock, but I can't test it 'til tomorrow.

Interestingly, I tested on Mac OSX and Linux and both had the same  
issues as regards playback on the new multicast address.


On 6 Apr 2009, at 16:15, Glen Gray wrote:

> Hey guys,
>
> I'm looking around at the samples in testProgs and interested in  
> using some techniques on a small project. I've had some problems in  
> getting the testProgs/testRelay app working sufficently.
>
> Basically, I've got an off the shelf TV encoder that broadcasts  
> MPEG2-TS onto the network. I used testRelay to read the source  
> address and relay it to another address. I've got VLC running on  
> another box on the same LAN with two play list items, one pointing  
> to the original broadcast address and the other to the relayed  
> address. Original plays fine, relayed one is corrupted badly with  
> lots of "libdvbpsi error (PSI decoder): TS discontinuity (received  
> 14, expected 12) for PID 17" type messages appearing in the logs.
>
> I'm looking for some tips on how to test this testProgs/testRelay so  
> that I can get a working stream relayed to another address.
>
> Thanks in advance,
> --
> Glen Gray
> slaine at slaine.org
>
>
>
>
> _______________________________________________
> live-devel mailing list
> live-devel at lists.live555.com
> http://lists.live555.com/mailman/listinfo/live-devel

--
Glen Gray
slaine at slaine.org