[Live-devel] channel mapping question

[David Schwartz]

My software isn’t working properly yet. These traces were intended to illustrate the problem, not the solution, and did not come from my software, which is an incorrect assumption on your part.

Regardless, my question was not about headers, but SDP data that IS being returned from a LIVE555 server.

Being that this is a discussion group for LIVE555 server users, I figured it’s an appropriate question.

I’m sorry if I was mistaken.

Any recommendations where I can post such questions where I’ll get more helpful replies?

-David 



On May 19, 2014, at 12:32 PM, Ross Finlayson <finlayson at live555.com> wrote:

> Note that this mailing list is specifically for questions about/discussion of the "LIVE555 Streaming Media" software.  It is not intended for general questions about RTSP, RTP or RTCP.  If your organization is interested in hiring me as a consultant/technical advisor for general architectural issues regarding streaming media, RTSP/RTP/RTCP etc., then please contact me via separate email.
> 
> 
> Nonetheless...
>> So I send two SETUP commands to the server:
>> 
>> SETUP rtsp://some.url/trackID=1 RTSP/1.0
>> CSeq: 4
>> User-Agent: LibVLC/2.1.3 (LIVE555 Streaming Media v2014.01.21)
>> Transport: RTP/AVP/TCP;unicast;interleaved=0-1
> 
> If you are using VLC (or 'LibVLC') as your RTSP client, then the RTSP protocol exchange, and RTP/RTCP packet reception and media rendering is taken care of automatically.  You do not need to know or care about the specific details of how this all works.
> 
> But if instead you are developing your own RTSP client application - that doesn't use 'LibVLC' - then you should not include a false "User-Agent:" header that claims otherwise.  (If you're not using the "LIVE555 Streaming Media" software - or VLC/LibVLC, which uses the "LIVE555 Streaming Media" software, then you definitely should not be claiming to be using it, because "LIVE555" is a trademark of "Live Networks, Inc.".)
> 
> 
>> When I was playing around with just the FIRST (video) SETUP command (without the audio SETUP), I observed messages in RTP payload for BOTH channel# = 0 AND channel# = 1, although I don’t know what the latter data was for.
> 
> The 'odd-numbered' channels are for RTCP packets.  Again, if you're using the "LIVE555 Streaming Media" software (or VLC/'LibVLC'), then RTCP is implemented automatically, and you don't need to care about it.  But again, if you're *not* using the "LIVE555 Streaming Media" software, then this mailing list is not appropriate.
> 
> Ross Finlayson
> Live Networks, Inc.
> http://www.live555.com/
> 
> _______________________________________________
> live-devel mailing list
> live-devel at lists.live555.com
> http://lists.live555.com/mailman/listinfo/live-devel

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.live555.com/pipermail/live-devel/attachments/20140519/746da312/attachment.html>